SAF silent bearings pulllers (assemble and disassemble) diameter 158.
Hub extractor M115x1.5.
Front wheel hub extractor.
Hollow cylinder box 17 tons with accessories.
Hydraulic hollow cylinder 30 tons, height 178,5mm, stroke 65mm.
Bearing block for 1/2 shell sets.
1/2 shell set, receiving tube and thrust ring for rod of 20.
Adjustable extractor from 140 to 450 mm, maximum heigh 340mm, suitable for studs 18x1.5, 20x1.5, 22x1.5, 24x1.5, 30x1.5 et 7/8".
Kit for move and remove silent bearing kit Ø70xL120 maximum, using with cylinder 18 tons.
Kit for move or remove silent bearing set Ø70xL120 maximum, using with the cylinder 26 tons.
Extractor clearance 30mm for ball joint and steering rod.
Extractor for ball joint and steering rod, clearance 32mm.
Extractor for ball joint and steering rod, 3/4" drive.
Extractor for ball joint average for passenger cars and light delivery vehicles.
Hydraulical extractor for ball joint from 24 and 32mm.
Extractor for ball joint and steering rod.
Extractor for ball joint and steering rod, clearance of 34mm.
Extractor for ball joint and steering rod, clearance 40mm.
Extractor for ball joint extra flat with cylinder 10 tons, clearance 36mm.
Extractor for ball joint with three interchangeable forcing forks, 25, 32 and 47mm.
Extractor for injector, M8x0.75, M12x1.5, M14x1.5.
Fork to loosen the ball joints.
Extractor 15t for bearing from 30 to 200mm.
Hydraulic hub puller 20ts for UV and trucks.
Universal hydraulic hub puller, UV and trucks.
Combined extractor 2 or 3 arms with adjustable reach.
Extractor "Super Traction" for broken screws from 4 to 20mm.
For extraction internal bearing Ø inside from 6 to 40mm.
Extractor with against-support for large bearings, rings and cylinder liners from 60 to 155mm.
3 tools set for removing and installing sleeves for Volvo and Renault DXi.