Clutch aligner Ø15 to 28mm + sleeves.
Device to control the tightness of the cooling circuits.
Tool to facilitate rotation of the camschaft.
Tool to facilitate the rotation of the camshaft, D12, D16, Volvo, RVI DXi.
Tool to facilitate the rotation of the camshaft.
Tool to facilitate rotation of the camschaft MAN or Mercedes.
Stainless steel tray with two powerful magnets.
Extractor "Super Traction" for broken screws from 4 to 20mm.
Lime to restore internal and external threads.
For extraction internal bearing Ø inside from 6 to 40mm.
Extractor with against-support for large bearings, rings and cylinder liners from 60 to 155mm.
3 tools set for removing and installing sleeves for Volvo and Renault DXi.
Chain wrench from 50 to 110mm, 6 point 32 or 1/2" drive.
Tool to facilitate the rotation of the DAF Euro 4 flywheel.
Tool to facilitate rotation of the flywheel DAF Euro 3
Tool to facilitate the rotation of the flywheel MAN engine.
Tool to facilitate the rotation of the Mercedes flywheel.
Female adaptor for radiator to purge or refill radiator liquid for Scania serie IV et V.
Depth gauge until 150mm.
Infrared thermometer from -35° to +500°C.
Inspection light, mounted on flexible, permits to light up a dark corner.
Inspection adjusting mirror 90° mounted on flexible, with powerful lamp lighting.
Set contains 4 transmission extractor from 10 to 32 mm with slide hammer system.
Special tool for engine valves Volvo and Renault DXi.
Quick adaptor to purge the Volvo engine cooling circuit.
Socket to deposite the injector for MAN and Mercedes.
Socket 1/2" drive to remove the injector for Mercedes.
Socket for injector Man et Mercedes 4035899040700.
Box with 4 Sockets for truck und bus injector.
Extractor with 3 mechanical jaws and slide hammer. Internal extraction of all parts.